Top Crossflow Cooling Tower Manufacturers in Saudi Arabia | Siddhant Equipment

What is Crossflow Cooling Tower?

Cross Flow Cooling Tower is a mechanical draft cooling system, the cooling air flows horizontally (cross) with the downflow of the hot process water. In this type of design, gravity-fed water is supplied by an open distribution basin situated above the fill, making the fill easy to access and uniformly saturate the fill media of the fill.

Types of Crossflow Cooling Tower

Being as well-established Crossflow Cooling Tower manufacturers in Saudi Arabia, according to design we provided different types which are given below.

A design with airflow and fan type (usually used together with crossflow design):

• Induced Draft Crossflow: It is associated with fans positioned on the top attracting air in a horizontal direction across the descending water which is a typical setup.
• Forced Draft Crossflow: It involves the application of fans at the air inlet where the air moves horizontally through the fill.
• Natural Draft Crossflow: This relies on large structures (such as the hyperbolic towers) to provide airflow, but is less popular in normal crossflow for Crossflow Cooling Tower suppliers in Saudi Arabia.

By Construction/Application:

• FA Crossflow: Small, pre-assembled in factories, easy-to-carry and set up.
• Field Erected (FE) Crossflow: Bigger, made on site, designed to meet huge cooling requirements, common with power plants.

Via Operating Principle (Can be Crossflow):

• Wet Crossflow: Wet type in which water is evaporated to cool.
• Dry/Closed-Circuit Crossflow: This involves a coil that has a different fluid (such as glycol) so that the water is not in contact and therefore freezing is avoided.
• Hybrid Crossflow: It uses a combination of wet and dry processes, which alternate to conserve water for Crossflow Cooling Tower exporters in Saudi Arabia.

Technical Specifications of Crossflow Cooling Tower

We've added below a specialized table of Crossflow Cooling Tower in Saudi Arabia that provides further technical specification information.

Benefits of our Crossflow Cooling Tower

We as Crossflow Cooling Tower suppliers in Saudi Arabia, we provided different benefits which are given below.

• Facility of easy maintenance: The open hot water distribution basin can be accessed on the top and the nozzles and basin can be inspected and cleaned as the tower is in operation in Cross Flow Cooling Towers.
• Reduced Pumping Energy: The water distribution system is usually located lower than alternative designs which means that it has a smaller pumping head which saves major power costs in operation for Crossflow Cooling Tower manufacturers in Saudi Arabia.
• Gravity Water Distribution: Water is spread evenly across the fill using gravity which avoids using the complex systems of high-pressure sprays and causes fewer problems with clogging.
• Quiet Operation Capability: The air intake is not usually obstructed as much, and the design gives it more flexibility in the placement of the fans usually leading to a lower noise level than that of counterflow units.
• Strength, Stable Structure: The naturally stiff rectangular frame, which may be made of Pultruded FRP or timber, is highly stable structurally and resistant to wind load.

Applications of Crossflow Cooling Tower

We serve as well-established Crossflow Cooling Tower exporters in Saudi Arabia, it is applicable in different sites which are given below.

• HVAC and Commercial Buildings: This is mostly used to eliminate waste heat in any water-cooled chillers and condensers in big business complexes, hospitals, and data centres to ensure effective air conditioning.
• Power Plants and Utilities: These play a critical role in cooling the condenser water in thermal and nuclear power plants, which is a crucial requirement in the optimization of the efficiency and output of steam turbines.
• Chemical and Fertilizer Production: We used crossflow cooling towers for efficient & reliable solutions to cool the process streams and reaction vessels, and to keep the temperature under control in order to have a safe and quality-controlled production of chemicals.
• Plastics and Die Casting: Crossflow Cooling Tower manufacturers in Saudi Arabia is essential to reducing the temperature of the hydraulics fluids and molds used in the plastic injection molding and metal die-casting machines to accelerate the production process.
• Refineries and Petrochemicals: Widely used to cool process and utility water systems, large amounts of heat are handled in complicated refining processes.

Why are we the most leading as Crossflow Cooling Tower manufacturers in Saudi Arabia?

• Ensured Thermal Performance: We use advanced designs and low thermal rating to provide our towers with guaranteed thermal performance to deliver the required thermal capacity or more, at variable conditions.
• High-Quality and longevity: We use very strong and corrosion-resistant materials such as high grade FRP and treated timber to ensure that the operation life of the product will last long and will have minimum downtime to our clients.
• Specialization and Adaptability: We provide custom designs to a host of tonnage needs and footprints with a smooth fit into any layout and process specifications of any industrial plant.

Siddhant Equipments Pvt. Ltd is notable crossflow cooling tower manufacturers, suppliers, exporters in Saudi Arabia Should heat not be the bottleneck of your business. You have our Crossflow Cooling Towers as your reliable Manufacturer, and partner we are offering the final Triple of strong construction, thermal efficiency that is guaranteed, easy maintenance. They have been designed to operate in challenging industrial conditions of the world near Pune, and they are the strong core of your stability of operation. Select AQUACOOL and ensure uptime, reduce lifecycle costs, and intelligent long-term investment in the performance of your plant.

(FAQs)